Innovatek OS GmbH - FORUM

Hi balster,

do you have a picture of the temp sensors? As I can remember are they the same as this one



So they fit in every block (cooler).

You have a PN.

cu
Herb

Hi innovatek,

Thanks again for the quick reply!



This is what it looks like, can it fit with a innovatek CPU block?

As you might have noticed I'm kinda news to all this, so Koreacool has a 8mm inner tube size right? So what is the inner tube size of a innovatek block? So I will know what kind of adapter to buy... does innovatek make these? is there a part number?

Will this work?
http://shop.freezinghardware.nl/index.a ... ItemID=309

Hi balster,

thats only another typ of sensor. You can put this part on the surface of the Xeon block.

Koreacool has 6x1 PVC tube. We have 8x1, so you need 6 to 8 adapter. But I would suggest you should buy two pieces of this:



Then you can use the old tube and you have to change the cooler ones.

cu
Herb

Okay, 2 final questions:

- Won't the temp sensor disturb the contact between the cpu and the block?

- What do you make of this?
http://www.Koreacool.com/products/faq.html#19

It says 1x8, I'm a bit confused...

Hi balster,

dont´t put the sensor between CPU and Cooler. This type of sensor can only show 1K steps, it´s unnessary to put him on the DIE.

Sorry, i didn´t know, that Koreacool switched to our fitting size. The 6x1 was then the old size from Koreacool.

So you don´t need anything to put our XEON kooler into the system, the fittings are compatible to this size of tube.

cu
Herb

Thanx that saves me some time and money. So I just put the sensor near the cpu?

Hi balster,

you can put the sensor to the Radiator fitting or on the surface/ fitting of the cooler. The only temperature who have a "spell" is the watertemperature.

cu
Herb