Hallo Hab mir nach Langen Überlegen eine Wasserkühlung von Inovatek Gekauft und Eingebaut leider gab es ein Par Kleine Missgeschicke bei der Montage bin trotzdem zufrieden mit dem Ergebnis für das Erste Mal
AMD XP3200+
Asus X800Pro
MSI K7n2 Delta2 Platinium
1024MB Arbeitsspeicher
1x 80GB Western Digital
1x 200GB Western Digital
Das Ganze wird Gekühlt mit dem Set XXS,
Cool-Matic X850
Graph-O-Matic Rev 3.0
Von Dingsbums nahm ich das Gehäuse Tsunami da man ohne Probleme den Sigel Radi hinten dran bauen kann.
Hier sind nun die Bilder
Hier das Ganze unter UV Licht
Hier bei Tageslicht
Die Frontblende des DVD Brenners bräuchte noch Etwas Anstrich sowie der Rahmen der Temperatur Anzeige.
Wäre Net wenn ihr mir Tipps dazu Geben könntet
Die Pumpe und der Ausgleich Behälter Pasten Gerade noch in den Festplatten Käfig, zum Nachfüllen muss allerdings die Festplatte ausgebaut Werden
Die Schläuche zum Radiator sind allerdings nicht Gerade gut Angebracht wollte aber nicht zur Bohrmaschine Greifen. Das Lüftergitter musste trotzdem raus ohne Späne zu Produzieren (es war Berits alles Eingebaut) also ging das nur mit dem Seitenschneider
was alles andere wie hübsch aus sah, momentan dient noch ein Halber Kraftstoffschlauch als Blende wird aber noch gegen eine Alublende Ausgetauscht.
Hier die Rückansicht
Die Zweifarbigen Leitungen Waren keine Absicht ich Hab mich leider verschätzt und Musste noch einen Blauen Schlauch von der Graph-O-Matic Hernehmen.
Bin Schon auf Eure Meinung Gespant