Innovatek OS GmbH - FORUM

Hi everybody!

I want to use the PowerSwitch feature:

I've plugged the cables as advised. When I push the power button of the PC, nothing happens.
I've tried 2 configurations for the Power Switch
1/ Disabled
2/ Hard power off

Any ideas?
Thx.

Welcome to our forum!

First of all: is the Powerswitch connected to the "P1" and one end of the Powerswitch-cable on "P2" and the other on your mainboard-powerswitch pins?

Check if the "Use sensor8 in" is off;
Check if the "Lock Powerswitch" is off;

I dont use the fan-o-matic but I had the same problem
I pushed the powerbutton but nothing happend
So I removed the mainboard and reassembled it and it worked
I dont know why but it helped, maybe the mainboard was connected to the PC case.

Hi weima,

Thx for the tip. And....




IT WORKS!!!


Just to be sure... If I program the PwrSw to shut down the computer in case of an error or an alarm (water flow too low...), it will work too. Right ?

Thx again.