This case I have specialy build for CEBIT 2005 on the EPoX booth.
During CEBIT 2005 on the EPoX without the innovatek VGA watercooling(much to hot inside the case because of the hot air from the vga cards)
I have solved this problem with the innovatek VGA watercooling
Specs:
AMD 4000+ San Diego
EPoX 9NDA+ SLI
Corsair Xpert Twinx1024 (2x512)
Seagate 400GB S-ATA (2x400gb in raid0)
Gainward 6800 Ultra Golden Sample CoolFX (2x SLI setup) (default 450/1200)
Liteon DVD-RW Dual Layer 16x
WC op 2xVGA
innovatek Cool Matic NV40BE
WC on nForce4 chip little alternativer Anbieter VGA block ZM-GWB 1
Reservoir = brand unknown
Pomp = Cronix Labs 12V (same as *** 350 only with plexi topcover)
Radiator = innovatek 120mm
Fan`s / CCFL`s AC-RYAN (1x30cm rood, 2x10cm blauw, 1x 10cm UV, 2x 30cm UV, 2x 30cm blauw)
and now pictures:
Just normal with only a window modded in it.
During CEBIT 2005 on the EPoX without the innovatek VGA watercooling(much to hot inside the case because of the hot air from the vga cards)
Now on this moment with the hot case problem solved thanks to the innovatek VGA watercooling.
and a few other pics.
I will place later on also night shots.
-------------------------------------------------------------------------------------
Hello, I am Tom(A.P.Versteeg).
Here already some pictures from the:
innovatek
this case wil be on the stand from AOpen on Cebit 2004 Hannover.
This is an innovatek watercooled system and the water is cooled with an compressor which is capable to cool the water even to -*C, but I have set it to 17*C water temp. because otherwise I will get condensation.
Hardware:
Aopen AK89-MAX mainboard
AMD64 3400+
Corsair Twinx 1024(2x512) PC3200LL PRO(with leds)
Aopen FX5950Ultra(dead) I`m hope to use an good Gainward again.
2x WesternDigital S-ATA Raptor 74GB 10K rpm in Raid 0
PHASE CHANGE Watercooling chiller by
www.haegkoeling.nl
AC-Ryan modding parts : fan`s / S-ATA\IDE UV cables / 6x dual CCFL UV / acryl panels / modbadge
And this case(new name) innovatek wil be on the stand from EPoX Cebit 2004 Hannover
The EPoX casemod I have made is based on a Lian-Li PC71 with innovatek Watercooling. I hope you like the mod and the pictures from this system.
Hardware:
EPoX 4PCA3+ Rev. 2.0 (875 Intel chipset water cooled Norht Bridge)
Intel P4 3.2 Extreme Edition(water cooled)
2x Western Digital S-ATA Raptor 74GB 8mb cache 10.000rpm in Raid 0 (boot)(both are watercooled)
1x Western Digital 60gb 8mb cache 7200rpm(extra data/backup)
2x
Corsair Twinx 1024 (4x512mb) PC4000 Pro
CoolFX 5950 ultra van Gainward(complete water cooled, also memory)
2x20 LCD on in side of the case left above from window(this is placed after these pics have made)
6x 80mm groen UV reactive fan`s(2inside PSU)AC-Ryan
UV reactive IDE cables van AC-Ryan
2x dual 30cm CCFL UV AC-Ryan
2x dual 30cm CCFL green AC-Ryan
Voeding cover Titanium + green Plexi AC-Ryan
Window Modbadges > H2O Addict AC-Ryan
innovatek:
Dual Radi met 2x papst 120mm
CPU block > innovatek rev4.0
Norht bridge > Graph-O-Matic Rev2.0 VGA/Chipset watercooler
GPU > CoolFX (watercooling voor GPU and memory)
Fan-O-Matic Rev 1.5 HighEnd Fancontroller(great piece of hardware)
Fass-O-Matic extern reservoir (from above)
Pomp reservoir EHEIM PLEXIGLAS
EHEIM 1048 (+ mod )
FlowMeter rev2.0 waterflowmeter
Inline-Watertemperature sensor.
3,5" Fancontroller - 4 Kanal
2xHD watercooler(this is new placed after this pics have taked)
FX vga memcooling on top
http://www.hardware.info/artikelen.php?id=78&page=2
http://www.theforumisdown.com/uploadfil ... %20046.jpg
http://www.theforumisdown.com/uploadfil ... %20034.jpg